Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Kirby
A new garage door installation in Kirby, TX typically runs $700-$2,200, with most single-car retrofits on older ranch homes landing in the $900-$1,400 range because of custom sizing. We measure, quote the flat price, and schedule the work once you approve it. No surprises on the bill.
We’ve been driving to Kirby since 1984, and we know the roads well: Ackerman Road, Binz-Engleman, the loops around Duffek Park. Our crews dispatch from the San Antonio office, which puts us at your door in Kirby quickly. When you call (830) 364-5701, a live person answers, 24/7. We don’t do phone trees.
Kirby’s housing stock is different from the rest of Bexar County. These 1950s-1970s ranchers were built for working families and military households, and their garages show it. Narrow single-car openings. Low headroom. Original wood doors that have warped through forty San Antonio summers. We’ve replaced doors on hundreds of these homes, and we’ve learned what works and what stalls.
Why Mainspring Garage Door Co. Is Kirby’s Preferred Garage Door Installation Company
We’re not new to this trade. Mainspring Garage Door Co. was founded in 1984, named for the spring that carries the entire weight of your door. That’s the part most homeowners never think about until it breaks. We think about it every day.
Kirby customers call us back because we quote flat prices before the work starts. The 90-Day Done Right Promise covers every job in writing: if it’s not right, we return at no charge. No paperwork battle, no arguing. Our technicians are background-checked, uniformed, and trained under our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it.
Most Kirby jobs finish in one visit because our trucks carry springs, cables, openers, and hardware for the brands these homes use: Genie, Clopay, Amarr, Wayne Dalton. We don’t leave you waiting on a parts order.
Our standing offers include $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. These don’t expire.
Our Garage Door Installation Services in Kirby
New Door Installation
A full new door installation in Kirby starts with measuring what you actually have, not what the catalog says you should have. Many Kirby garages were built with 8-foot-wide openings that don’t match modern 9-foot stock. We order custom-width steel or wood doors when needed, and we handle the jamb modification if the opening requires it. A typical new door installation in Kirby runs $700-$2,200 depending on material, insulation, and whether we’re reworking the frame.
Single Car Door
Single-car garage doors are our most common Kirby request. These original ranch-house garages are compact, often with low headroom clearances that complicate standard track and opener setups. We spec doors that fit the opening without forcing a frame rebuild, and we match the hardware to the existing clearance. A single-car door replacement in Kirby typically falls between $700 and $1,400.
Double Car Door
Some Kirby homeowners have converted carports or added attached garages over the years, creating double-car openings that need proper support and balance. We install torsion spring systems rated for the wider span, with high-cycle springs that hold up to daily use in Kirby’s heat. Double-car installations generally range from $1,200 to $2,200.
Custom Garage Door
Custom orders are where Kirby’s unique housing stock really matters. We’ve built doors for openings under 8 feet wide, for garages with unusual headroom constraints, and for homeowners who want wood grain or carriage-house styling that matches their 1960s ranch aesthetic. Custom work starts around $1,400 and scales with material and hardware choices. We measure twice and order once, because a mismeasured custom door costs weeks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kirby
We work with the brands Kirby homeowners already have: Genie openers from the 2021 freeze replacements, Clopay steel doors that have held up since the 1990s, Amarr and Wayne Dalton hardware that still has parts availability. Our trucks stock springs, cables, rollers, and opener components for these lines, so we’re not ordering and returning. If your door or opener is one of these brands, we probably have what we need on the truck.
Common Garage Door Installation Problems We See in Kirby Homes
- Narrow 8-foot openings that won’t take standard doors. Many Kirby ranchers were built with single-car garages measured to 1950s specs. A modern 9-foot door won’t fit without jamb modification or a custom order, and not every installer catches this before the truck arrives.
- Low-headroom track kits from decades-old retrofits. Previous owners often installed low-headroom track to squeeze a door into tight clearance. Standard opener brackets and spring hardware won’t clear those angles, so a same-day swap becomes a multi-visit retrofit if the tech isn’t prepared.
- Mismatched hardware hiding the real failure. We’ve found extension springs mixed with torsion hardware, stretched cables paired with worn drums, and rollers that don’t match the track radius. The symptom looks like a dying opener. The cause is usually a fatigued spring or binding hardware.
- Permit confusion between Kirby and San Antonio. Kirby runs its own inspections independent of San Antonio, despite being geographically surrounded by it. Homeowners who schedule assuming San Antonio’s process often face delays when Kirby’s separate requirements surface at final sign-off.
Pricing for Garage Door Installation in Kirby, TX
Here’s what we charge for garage door work in Kirby. The price we quote is the price you pay. We agree on it before any work begins.
| Service | Price Range in Kirby |
|---|---|
| New Door Installation | $700-$2,200 |
| Panel Replacement | $250-$500 |
| Track Realignment | $120-$240 |
| Roller Replacement | $110-$220 |
| Spring Repair | $180-$340 |
| Cable Repair | $130-$250 |
| Opener Installation | $250-$550 |
| Opener Repair | $120-$320 |
| General Garage Door Repair | $150-$600 |
Custom sizing, jamb modification, and low-headroom retrofit hardware can push a job toward the higher end. We tell you that during the free estimate, not on the invoice. Call (830) 364-5701 to schedule your measure.
We Also Serve Cities Near Kirby
Our Garage Door Installation crews work throughout the San Antonio metro area, including Kirby and neighboring Alamo Heights, San Antonio, Castle Hills, and Terrell Hills. The same flat pricing and 90-Day Done Right Promise apply in every city we serve.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Kirby
Probably not. Many Kirby ranchers have original 8-foot-wide single-car openings that predate modern 9-foot standards. We measure on-site and order custom-width doors or modify the jamb to fit. Call (830) 364-5701 for a free measure and exact quote.
Most of the time it’s the spring, not the opener. We were called to a mid-1960s single-car rancher off Ackerman Road where the homeowner thought the opener was dying. Our tech found a fatigued torsion spring and worn drums, not an opener problem. Because the existing opening measured just over 8 feet with low headroom and an old low-headroom track kit, we spec’d a custom-width steel sectional door, reset the end bearing plates and cables, replaced the spring with a high-cycle unit, and added a fresh weather seal. That let us keep the customer’s existing opener and rail with a simple bracket adjustment instead of ordering a full opener replacement. Call (830) 364-5701 and we’ll diagnose it properly.
Kirby operates its own permitting and inspection process, independent of San Antonio despite being fully surrounded by it. We handle Kirby’s requirements as part of the installation and make sure the inspection is scheduled correctly. Call (830) 364-5701 and we’ll walk you through the local process.
A standard-cycle spring lasts about 7-10 years with typical use. In Kirby’s heat, with doors that often run twice daily, we recommend high-cycle springs rated for 15,000-25,000 cycles. Ask for the cycle rating in writing. We install high-cycle units as standard on most Kirby jobs. Call (830) 364-5701 to discuss your door’s usage pattern.
Yes, but it requires the right bracket geometry. Standard-reach opener arms won’t clear the steep track angles of old low-headroom kits. We carry low-clearance brackets and have modified hundreds of these Kirby setups. Sometimes we replace the track kit entirely if the door is being swapped anyway. Call (830) 364-5701 and we’ll assess what’s needed.
Ready for a new garage door in Kirby? Call (830) 364-5701 for a free estimate. We’ll measure your opening, explain whether you’re looking at a standard install or a custom retrofit, and give you the flat price before any work starts. No surprises on the bill. We stand behind it.
Written by Carl Dutton, Owner at Mainspring Garage Door Co., serving Kirby since 1984.